ning around the internet you can find the strangest projects.
This happen to be one of the wildest: working after an open source computer car “to take automotive computer technology to the next level“.
I don’t know whether this project is linked to Mpeguino, but the sponsor page make me doubt it.
Shall we wait for the true open source car, don’t we??
via [GeekMyRide]
Tag Technorati: car, computer, opensource,
Archive for the ‘Urban Hacks’ Category
Geek-My-Ride: notes after the Open Source Computer Car
04/03/2010Bring the crane game home
26/02/2010Now we all can learn & train to win the naughty crane ganes.
New home monitoring setup – part 1
26/02/2010The second post of the week about open source home monitoring.
Part – 1 means that for now you can read just a long list of pieces of hardware.
But then: home monitoring and X10 are the more interesting projects around.
waiting for part 2!
via [John Rambilngs Blog]
TwypeWriter (Twitter Monitoring Typewriter)
22/02/2010How to build a web connected gas meter with your Arduino
16/02/2010[Richard] points out nother way to spread information over the internet via arduino (as he did in this post on eHome). He tries to send gas information to the Pachube, using EEML as the format.
Read the full entry.
Tag Technorati: arduino, pachube, eHome, gas sensor,
OpenEnergyMonitor – Documentation finished for the whole home energy monitor
16/02/2010
Over the Top: The project Top: The display, Middle: The main unit with CT sensor, Voltage sensing, USB datalogging… Bottom: Ethernet unit for internet connectivity, Very Bottom: graphs
The energy monitor is working away logging energy consumption data, giving some informative readouts and nice looking graphs! there’s more about it in the blog post here and the documentation here.
via [OpenEnergyMonitor]
Tag Technorati: arduino, enviroment, energy monitor,
Microprinter RSS Arduino Driven
15/02/2010Nice step by step project to display feeds on a microprinter.
The concept of Microprinting as described by Tom Taylor is “an experiment in physical activity streams and notification, using a repurposed receipt printer connected to the web”. Using this and the works of others as inspiration, I set about making my own Internet connected printer.
Before starting the project, I hadn’t had any previous experience of building electronic circuits, and it had been over 10 years since I had last picked up a soldering iron. Unperturbed, I set out and acquired everything I needed for the project:
- An old receipt printer – I have a Citizen CBM-231 from ebay
- An Arduino board, bread board and jump wires (from Cool Components)
- An Arduino Ethernet shield (also from Cool Components)
- A MAX233 Chip and serial plug (from Maplins)
The serial output of the Arduino board isn’t natively compatible with the printer – you need to run the signal through the MAX233 chip to transform the output to the correct voltage.
read the full article.
via [flipbit]
Don’t walk! Controlling a pedestrian sign with an Arduino
09/02/2010From Ben Shiriff: My latest project is controlling a pedestrian sign with an Arduino, so it will automatically step through the states of walk, flashing don’t walk, and solid don’t walk. In addition, I added infrared remote control support so I can use a remote control to turn the sign on and off, set it to a particular state, or start the cycle.
via [ARCfn.com]